Utility pole inspection drill providing remaining strength
The IML-RESI System is based on the principle of measuring the drilling resistance. With the IML-RESI PD-Series digital inspection drill you can drill at every height of the pole, from the soil level to the top end of the pole. This provides you with a fast and efficient method of capturing the internal state of the wood. The inspection drill captures the resistance of the wood against a 1/10” bit providing you with an outline of where decay or cavity may be found inside the pole. The IML-RESI PowerDrill digitally presents the wood quality by measuring the drill’s needle resistance through the core of the wood. With a digital wood inspection drill the measurements are easy to capture, display and analyze. Pair the PowerDrill with the WoodInspector software and save time on analysis by including automatic, pre-set pass and fail values. is measured depending on the drilling depth of the needle. We are available to provide on-site demos, help with customizations, default packages, and supporting pilot programs.