Parker Autoclave Engineers  

Erie,  PA 
United States
http://www.autoclaveengineers.com
  • Booth: 2230

Manufacturer of Stirred and Non-Stirred Reaction Pressure Vessels with ASME code stamp or CE mark as required. MagneDrive Packless Mixer - variety of impeller types for mixing or catalyst baskets for spinning.- zero leakage.  Vessels can be heated/cooled as required. Catalytic Baskets include Berty Type, Carberry Type, Robinson-Mahoney, Mohoney-Robinson, and Dispersimax TM.  Enclosure Types are Zipperclave, Eze-Seal, Bolted-Closure, and Mini in Bench Top or Floor Stand units. Universal Reactor Control Unit in 110 or 220VAC options.


 Products

  • Mini - Reactor
    Miniature Reactor for Parallel small volume studies at temperature with/without inline mixing in 50ml and 100ml designs....

  • Highly capable design incorporating features found in a full size laboratory reactor at reduced internal volumes, 50ml & 100ml vessel sizes share same closure geometry. Small footprint for parallel studies under fume hood. 2900 psi @ 315°C max.

    Standard Features Include:

    Elastomer seal with finger tight closure make-up

    Easy removal electric heater with over-temperature thermocouple

    Process thermocouple

    Gas inlet valve

    Vant valve with pressure gauge/transducer and safety rupture disc.

    Optional In-Line MagneDrive packless mixer/agitator for liquid or catalyst spinning.

    ASME code stamp or CE Mark available

  • ZipperClave® Floor Stand Reactor
    Parker Autoclave Engineers ZipperClave® is a reliable quick-opening closure for up to 2000 psi service....

  • Zipperclave reactor uses a unique spring loaded Oring closure that is capable of up to 2000 psi @ 176°C. One pull and the closure is free and the vessel body drops from the fixed closure.  2,000 and 4,000 ml vessel options share similar closure geometry and can be interchanged.

    Standard Features include:

    Electric Heater

    Floor-stand with Swing-away body lift

    Liquid sample tube with valve

    Vent Valve with pressure gauge/transducer and safety rupture disc

    Solids charging port

    Optional In-Line MagneDrive with 1/3 hp motor

    Optional Elastomer Seal for lower temperature operation

For Technical Support with this webpage, please contact support.