Vanair  

The ELiMENT™ LiFePO4 Battery (Lithium Iron Phosphate) is the “heart” and power of the EPEQ™ system.

The EPEQ™ System Smart Controller is controlled by a smart display which has proprietary software designed to intelligently monitor and control all EPEQ™ system components. Each component can communicate to the display allowing the user to make priority decisions to manage the load applied to the battery. The loads allowed to draw on the battery can be adjusted based on various factors such as: temperature, heat build-up, duty cycle, assigned function priorities, and power remaining.

EPEQ™ Air Compressors are driven by highly tuned specialized permanent magnet AC (PMAC) electric motors for increased efficiency to prolong battery range. The EPEQ™ AIR20 and AIR45 compressors communicate with the EPEQ™ System Smart Controller and are designed to provide optimal performance.

EPEQ™ IM (Idle Mitigation) automatically stops and starts your vehicle’s engine while continually operating the vehicle’s HVAC and accessories. The idle mitigation system is the ideal economical solution for fleets with demanding electrical needs as well as for simple idle reduction for fuel and maintenance savings. EPEQ™ IM allows the user to operate combustion engine vehicles, while reducing carbon emissions. A great option for those looking to save on fuel, cut engine maintenance, and reduce chassis workload.

EPEQ™ EPTO Now, you can power your hydraulic crane, boom truck, and other hydraulic operated components using our EPEQ™ EPTO power system and ELiMENT™ Battery. This new way to operate hydraulic components is the best fit for electric vehicles and vehicles that do not have a traditional power take off (PTO) setup, or in instances when you want to power hydraulics with the vehicle off. The EPEQ™ EPTO operates like a traditional PTO/pump setup, meaning there’s no need for a full re-engineering of your hydraulic equipment.

EV CHARGING -  Charge electric vehicles when away from a permanent mount EV charger. The ability to charge an electric vehicle without the need for an additional internal combustion engine (I.C.E.) and without the need to move heavy components sets the EPEQ™ EV Charger apart from the competition. The modular design of our entire EPEQ™ product lineup allows the customer to add EV charging capabilities to an already installed EPEQ™ Air Compressor system or add an EPEQ™ Compressor to an existing EPEQ™ EV Charging Module.

• ELiMENT™ Batteries have a high energy density which offers vast improvement in capacity, weight, and shelf life over AGM and standard lithium-ion batteries.
• ELiMENT™ Batteries are long lasting and provide full amperage output even at 10% remaining battery life.
• The ELiMENT™ Battery can be fully cycled at least 5000 times and has an impressive 5–7- year lifespan.

ELiMENT™ fully charges in as little as 1.5 hours and requires zero maintenance. This combination of long life, fast charge, slow discharge, and maintenance free, means you’ll experience minimal downtime and maximum productivity, saving you time and money.

Each ELiMENT™ Battery comes with its own Battery Management System (BMS) which protects against over current, over/under voltage, and over temperature by monitoring the state of the battery cells.

LiFePO4 batteries are chemically very stable making them amongst the safest battery technologies available on the market. They are inherently non-combustible and will not overheat. Even if punctured, they will not catch on fire. The ELiMENT™ Batteries are nontoxic and don’t give off dangerous or hazardous fumes making them safe to use and safe for the environment.

ELiMENT™ BATTERY SPECIFICATIONS
• Capacity: 100 Ah
• Voltage: 48
• Cycles: 5,000
• Material: Lithium Iron Phosphate
• Size: 13.38” L x 12.5“ W x 11.8“ H with Handles
• Weight: 107 lbs.
• Protections:
    - Over-Current and Short-Circuit
    - Over-Charge and Over-Discharge
    - Over-Temperature and Under-Temperature
• EPEQ™ Battery Management System

When you need Clean, Quiet, Power™ in a smaller, smarter, and portable package, look no further than the new EPEQ™ Electrified Power Equipment® product lineup.  The ability to carry the entire welder and cables right next to the equipment being worked on, makes our WELDER140 user-friendly for those light and fast repair jobs in the field. The EPEQ™ Welder provides two charge modes: 1.5-hour fast charge and 3-4 hours standard charge.

FEATURES
• Lithium-Ion Battery Replaces AC Power Supply for Convenience and Mobility
• Built-In High Power Constant-Current and Constant-Voltage Charging Unit for Fast Charging
• Ergonomic Handle and Weight Balance Design for Easy Carrying
• Hot Start for Easier Welding
• High Accuracy Display for Current
• Easy to Read LED Display
• Waterproof, Dust Proof, Shock Proof, Rugged and Durable Battery Pack

EPEQ™ WELDER PERFORMANCE AND SPECIFICATIONS
• Lithium Powered Welder Containing Internal Battery
• CC Welding Capabilities
• Capacity: 140A Stick Welder
• Size: Lightweight Design 34 lbs.
• Duty Cycle: 20% 140A; 50% 110A; 100% 80A
• Dimensions: 18.3” L x 7.6” W x 14.9” H
• Clean, Quiet Operation
• User-Friendly for Quick Repair Jobs
• Portable; Ability to Carry the Entire Welder and Cable