Seizmik UTV

The new ball joint and low profile clamp allow for a wide range of motion and break away feature, and accommodates the various A-pillar angles created by OEM or custom cages. Clamp sizes available will accommodate most any UTV: 1.75” round tube ROPS; 2” round tube with included shims for 1.875” round tube ROPS; and Polaris Pro-Fit or Can-Am Profiled ROPS.

The Photon Side View Mirrors include replaceable, convex mirror glass and, as always, are backed by Seizmik’s Unlimited Lifetime Warranty. We don’t care if your cow eats the mirror, or you shoot it, we’ll send you the replacement parts needed to repair the mirror for FREE.  SERIOUSLY.  FREE.  And, you can customize your Photon Side View Mirrors to match your ride with our color Bezel and Cap kits (sold separately).

Available fitments for the following vehicles:

18107 Photon Side View Mirror Cast Aluminum - 1.75" ROPS

18108 Photon Side View Mirror Cast Aluminum - 2" (with included shims for 1.875") ROPS

18109 Photon Side View Mirror Cast Aluminum - Pro-Fit | Profiled ROPS

Available color kits:

19019 Photon Cast Aluminum Trim Kit- Red

19020 Photon Cast Aluminum Trim Kit- Blue

19021 Photon Cast Aluminum Trim Kit- Green

19022 Photon Cast Aluminum Trim Kit- Yellow

While your UTV may have come equipped with what the manufacturer might refer to as a “skid plate”, it’s really nothing more than a thin piece of plastic that offers minimum protection for your fuel tank, battery, parts of your transmission, and (if you’re lucky) a small portion of the front and rear differentials.  Don’t take a chance with these crucial components, protect your investment and extend the life of your UTV with better undercarriage protection—demand a Seizmik UHMW Skid Plate & Rock Sliders Kit and tackle the trails knowing that your undercarriage is protected from unwanted damage.

Manufactured at our facility in Cairo, GA, our plates are precision cut and bent from 1/2” thick Ultra High Molecular Weight (UHMW) polyethylene sheets, offering our skid plates and rock sliders superior strength to the stock OEM or an aftermarket aluminum skid plate. The 1/2” thick UHMW features impressive resistance to denting, gouging, and rusting caused by blunt edge impacts or sliding over obstacles.  A typical OEM plate’s material has a tensile strength of roughly 4500 PSI, while Seizmik’s UHMW material has a tensile strength of 7010 PSI.  And Seizmik’s plates are 4x thicker than the average OEM plate.

Installation is made easier with less drilling required thanks to the use of existing OEM mounting points and glass filled nylon frame clamps with brass inserts.  Easy to handle sections piece together to cover the entire undercarriage of the vehicle, including the front and rear differentials.  The corrosion resistant mounting hardware is recessed below the plate’s surface, protecting the fasteners from damage.  

Like to spend some time in the mud? Not a problem! Our plates come with more drain holes strategically placed for quicker clean up.  There is no need to drop the plate in order to clean the bottom of your UTV.  Or, is sliding across a rocky surface more your thing?  Again, no problem.  UHMW has a low friction coefficient, excellent abrasion resistance, and is know for its natural lubrication—making it an excellent choice for sliding applications.

And the value doesn’t stop there.  Our kits include side panels to serve as rock sliders and offer protection to the Polaris Ranger XP 1000’s rocker panels.  When you start to add up all of the features and protection to the crucial components of your vehicle, you’ll quickly realize the value offered by Seizmik’s UHMW Skid Plate & Rock Sliders Kit.  Don’t miss out on this “must have” upgrade.

Available fitment:

76-10163KIT UHMW Skid Plate with Rock Sliders Kit Polaris Ranger XP 1000 2 Seat

76-10164KIT UHMW Skid Plate with Rock Sliders Kit Polaris General XP 1000 2 Seat

76-10165KIT UHMW Skid Plate with Rock Sliders Kit Polaris RZR XP 1000 | Turbo 2 Seat

76-10166KIT UHMW Skid Plate with Rock Sliders Kit Polaris RZR Turbo S 2 Seat

76-10167KIT UHMW Skid Plate with Rock Sliders Kit Polaris RZR Pro XP 2 Seat

Coming in 2022:

76-10168KIT UHMW Skid Plate with Rock Sliders Kit Polaris Ranger XP 1000 4 Seat

76-10169KIT UHMW Skid Plate with Rock Sliders Kit Polaris General XP 1000 4 Seat

76-10170KIT UHMW Skid Plate with Rock Sliders Kit Polaris RZR XP 1000 | Turbo 4 Seat

76-10171KIT UHMW Skid Plate with Rock Sliders Kit Polaris RZR Turbo S 4 Seat

76-10172KIT UHMW Skid Plate with Rock Sliders Kit Polaris RZR Pro XP 4 Seat

Who doesn’t love hitting a murky hole and slinging a little mud while out on a ride? Who hates the extra clean up and listening to passengers complain about being covered in mud? With a Seizmik HDPE Fender Flare Extension Kit, you can hit those mud holes knowing your vehicle and passengers won’t be completely covered in muck. 

Precision cut and bent from 0.15” thick High-Density Polyethylene (HDPE) at our facility in Cairo, GA, our fender flare extension kits fit your OEM standard or extended fender flares.  With the thicker material, a more three-dimensional form for added rigidity, and structural tabs for reinforcement, our flares will keep their shape and won’t droop when mud starts sticking to its underside.  Our kits also provide additional interior cabin protection with more inner wheel well coverage than what is provided by other flare extension kits.

The aggressive styling of our fender flare extensions echo and compliment the body lines of your side-by-side.  The anodized aluminum and stainless steel hardware, textured finish on the visible (upper) side of the flares, and the added accent branding will keep these kits looking nice for years to come.  So, don’t avoid those muddy trails, embrace them knowing clean up will be a little easier with a Seizmik HDPE Fender Flare Extension Kit installed on your UTV.

Available fitments for the following vehicles:

67-10007KIT - HDPE Fender Flare Kit Polaris RZR XP 1000|Turbo|Turbo S - 2|4 seat

67-10008KIT - HDPE Fender Flare Kit Polaris General XP 1000 - 2|4 seat

67-10009KIT - HDPE Fender Flare Kit Polaris RZR Pro XP - 2|4 seat