Rozachim AD

Gorna Oryahovitsa,  Veliko Tarnovo 
Bulgaria
http://www.rozachim.eu
  • Booth: 709


 Products

  • Styacryl X series
    Polymer emulsions for industrial and architectural coatings
    DAAM /ADH Crosslinked Series
    ...

  • Acrylic Emulsion based on Self Crosslinking technologies 

    raising water borne performance …

    Aqueous acrylic polymer emulsions Styacryl Xseries are  designed for replacing solvent borne

    systems. Owing to regulations limiting volatile solvent (VOC),new technologies are used to significantly

    improve the performance of Aqueous emulsion properties. A major contributor to these performance 

    enhancements has been Next generation acrylic polymers Styacryl Xseries produced  on the…..

                                         =  Ambient Self Crosslinking  technology = 

    The new technology leads to advancements in film mechanical properties; chemicals, water, and

    abrasion resistance; durability; adhesive properties; and solvent resistance. This results  have further

    driven the growth of waterborne acrylic technologies.

    The Styacryl Xseriesemulsions provides a number of benefits for consumers. From reducing safety

    concerns to improving performance properties, the benefits of these intermediates are numerous.

    Consider that……

    After film coalescence, crosslinking becomes rapid at ambient temperatures, thanks to water 

    evaporation in the drying process and a simultaneous reduction in pH arising from the loss of ammonia.

    Because crosslinking is post-coalescence, the resulting three-dimensional polymer network exhibits 

    enhanced mechanical strength and durability as well as maximum film cohesive properties.

    Coatings produced with Styacryl Xseries  are initially non-reactive and afford  with good long-term

     stability during shipping and storage in retail containers (i.e., “in-can” stability).

    Use of Styacryl X series enhances abrasion, scrub, stain, and blocking resistance; moisture and

    solvent resistance; and coatings  adhesion.

    Low-VOC levels, < 100g/l typically, offering a better working environment
  • Polymer emulsions for multipurpose adhesives
    Styacryl GA Brochure...

  • Polymer emulsions for multipurpose adhesives 
  • Polymer emulsions for gloss paints, lacquers&more
    Polymer emulsions for gloss paints, lacquers and special coatings...

  •    Nowadays, there is an increasing interest in eco-friendly, low-emission gloss paints, lacquer and varnishes. Water based Styacryl emulsion is a very good alternative to solvents based if you would like to reduce the VOC content while keeping the required properties of the product. Styacryl acrylic emulsion is based on standard or core shell technology offering great balance between excellent performance and covering ecological standards.

       

  • Polymer emulsions for interior coatings and paints
    Polymer emulsions for interior coatings and paints...

  • Polymer emulsions for interior coatings and paints
  • Polymer emulsions for exterior coatings and paints
    Polymer emulsions for exterior coatings and paints...

  • Exterior coatings must protect the surface while providing an amazing finish. The product is standard for exterior coating such as pure acrylic and styrene acrylic. We have recently added new emulsions “Think green emulsion - people’s friendly paints “ in order to reduce the VOC (volatile organic compound) content.  

  • Polymer emulsions for ceramic tiles and more...
    Polymer emulsions for ceramic tiles and more......

  • Polymer emulsions for ceramic tiles and more...
  • Polymers for paper and board
    Polymers for paper and board...

  • Polymers for paper and board

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".