Washing machine for open top wheeled containers, IBCs in HDPE and in stainless steel, with tilting platform (available upon request).
Model /S
For solvents
ATEX components
Pneumatic driven washing head
580 psi (max) washing pressure
30 lt/min flow rate (60 lt/min available upon request)
7,5 kW three-phase motor for 9 kW total power installed (9,5 kW three-phase motor for 11 kW total power installed with 60 lt/m HP pump)
2-phase cycle (washing and rinsing) in closed loop
3 to 5 lt (max) of solvent used per cycle
nitrogen blanketing ready
Model 250/A
For water / water+detergents / sanitizers
Electric driven washing head
3625 psi (max) washing pressure
37 lt/min flow rate
18,5 kW three-phase motor (20,5 kW total power installed)
3-phase cycle (prewash, wash and rinse) in open or closed loop
18 lt (max) of water used per cycle (in closed loop)
Model 400/A
For water / water+detergents / sanitizers
Electric driven washing head
5801 psi (max) washing pressure
45 lt/min flow rate
37 kW three-phase motor (39 kW total power installed)
3-phase cycle (prewash, wash and rinse) in open or closed loop
23 lt (max) of water used per cycle (in closed loop)
COMMON FEATURES
UL certificate available
It is required the presence of a lower discharge valve from 1.5″ to 3″.
3 possible cycles: Eco – Standard – Long.
Average cycle time: 3 to 5 minutes (excluding time needed for loading and unloading operations)
Available with AISI 304 micro shot peening stainless steel structure and with grated grid for waste water collection.
Combination with EWEC or EWEC2 stations for drum washing.
OPTIONALS AVAILABLE
For S versions
- Cycle with solvent vapours containment (in closed cabin)
For /A versions
- Possibility of using hot water up to 40°C (max 5801 bar) and 70°C (max 36125 bar) with insulated tanks.
- Washing with detergents
- Washing with sanitizers
- Inside blowing
- External manual/automatic washing of the containers (with external station).
- Washing of conical trunk containers with valve on the bottom (in a closed cabin in 4 phases – washing, washing, washing of the bottom and rinsing valve)
- IBC drying (with additional unit)
- micro-leaks checking onIBCs in HDPE (with additional external unit)