BruggemannChemical U.S.

Newtown Square,  PA 
United States
http://www.brueggemann.com
  • Booth: 1865


Welcome to BrüggemannChemical!

Bruggolite® advanced reducing agents are formaldehyde free, have higher reactivity, and do not yellow when used for production of emulsion polymers.  Better results are possible when compared to traditional redox formulations used for main and post polymerization

We are the only company that generates data on redox chemistry and processes to improve productivity and minimize residual monomers.  We have assembled these data into short presentations, which can be found at the following link: Courses

Take a course at the Bruggemann Institute of Redox Chemistry, Booth 1865

 Products

  • Bruggolite® FF6 M
    Bruggolite® FF6 M is the first formaldehyde-free sulfur based reducing agent that meets stricter regulatory requirements for emulsion polymers. Typically used at pH 4-8 and from 65°C down to 20°C for main and post polymerization....

    • Formaldehyde and VOC-free
    • Increased reactivity
    • Significant reduction of residual monomer / VOCs  in emulsion polymers
    • No yellowing of the polymer and latex end products
    • FDA direct food contact approvals:​
      • 175.125
      • 175.300
      • 175.320
      • 175.105
      • 176.170
      • 176.180
      • 177.2600
    • Dust-free microgranules
  • Bruggolite® E28
    Bruggolite® E28 is a formaldehyde-free derivative of Bruggolite® FF6 M reducing agent, tailored for better rusults in emulsion polymers at pH values ​​2-4....

    • Formaldehyde and VOC-free
    • Increased reactivity
    • Significant reduction of residual monomer / VOCs in emulsion polymers
    • No yellowing of the polymer and latex end products
    • FDA direct food contact approvals:​
      • 175.125
      • 175.300
      • 175.320
      • 175.105
      • 176.170
      • 176.180
      • 177.2600
    • Dust-free microgranules
  • Reducing agent TP 1853
    Reducing agent TP 1853 is a new type of formaldehyde-free reducing agent with an enlarged processing window (pH and temperature). It shows excellent properties in the emulsion polymerisation of vinyl acetate-based systems....

    • Formaldehyde and VOC-free
    • Increased reactivity
    • Significant reduction of residual monomer / VOCs  in emulsion polymers
    • No yellowing of the polymer and latex end products
    • FDA direct food contact approvals:​
      • 175.125
      • 175.300
      • 175.320
      • 175.105
      • 176.170
      • 176.180
      • 177.2600
    • Dust-free microgranules
  • Reducing Agent TP TP 1651
    Reducing agent TP 1651 is a new type of formaldehyde-free reducing agent with a larger processing window (pH value and temperature), showsing excellent properties in the emulsion polymerisation of styrene acrylate-based systems....

    • Formaldehyde and VOC-free
    • Increased reactivity
    • Significant reduction of residual monomer / VOCs  in emulsion polymers
    • No yellowing of the polymer and latex end products
    • FDA direct food contact approvals:​
      • 175.125
      • 175.300
      • 175.320
      • 175.105
      • 176.170
      • 176.180
      • 177.2600
    • Dust-free microgranules
  • Reducing Agent TP 2009
    New cost effective formaldehyde free reducing agent for emulsion polymers, typically used to replace ascorbates in redox formulas....

    • Formaldehyde and VOC-free
    • Increased reactivity
    • Significant reduction of residual monomer / VOCs  in emulsion polymers
    • No yellowing of the polymer and latex end products
    • FDA direct food contact approvals:​
      • 175.125
      • 175.300
      • 175.320
      • 175.105
      • 176.170
      • 176.180
      • 177.2600
    • Dust-free microgranules
  • Bruggolite® E01
    Bruggolite® E01 is a sodium formaldehyde sulfoxylate (SFS) / sodium hydroxymethanesulfinate (NHS) reducing agent. Available in powder or granular form....

    • Since 1926, Brüggemann has produced sodium formaldehyde sulfoxylate (SFS) / sodium hydroxymethanesulfinate (NHS) for textile and emulsion polymer applications.  SFS, combined with an oxidizer such as tBHP, is a very effective redox couple to reduce residual monomers/VOCs in emulsion polymer main and post polymerizations. 

Categories

1. Coating Raw Materials
  • 1.5.05 Catalysts
  • 1.5.09 Stabilizers
  • 1.5.16 Other additives
    • 5. Services
  • 5.4 Technical Information and Publication
  • 5.7 Contract Manufacturing

    • Send Email

    Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".

    Back to the Search
    Loading ...

    :
    :


    Legend
    Available Timeslot
    Scheduled Appointment
    Personal Appointments
    Appointment Request
    Blocked Timeslot
    Restricted Timeslot
    Cancelled
    Declined