The Mini-Flushplate, with its multiple interchangeable abrasive heads, is one of the most versatile tool systems available today. Employing the 3M Roto Peen hub, the Mini-Flushplate performs like a hand-held controlled shot blast machine capable of achieving SSPC Sp.11 cleanliness and is NAVSEA approved. The hammer hub, when used, performs like a high speed needlegun. The cutter hub is the most aggressive and is capable of removing non-skid and even scarifying concrete. 

The FX Tool was designed for only one reason - PRODUCTION. The FX Tool, with its multiple interchangeable abrasive heads, is the most aggressive mid-sized tool available today. Employing the 3M Roto Peen Hub, the FX Tool performs like a hand held controlled shot blast machine, capable of achieving SSPC Sp.11 cleanliness. The Hammer hub, when used, performs like a high-speed needlegun. The most aggressive hub is the Cutter hub, which is used for removing non-skid, scarifying concrete, and when a nasty job just has to get done

Desco Standup FX Tool Applications and Specifications The Desco standup FX tool has all of the same great features as the hand-held version but in a convenient standup model which allows for less working fatigue.
Applications: • Mill scale removal • Pre-weld preparation • Coating removal • Bridge construction • Ship construction • Surface profiling (shot-blast like)
Specifications: Power     Pneumatic ................. 90psi @ 39 cfm, 4,500 rpm     Electric ................................ 110v, 15a, 6,000 rpm Arbor ............................................................ 5/8”-11 Cleaning Swath ............................................... 4.25” Productivity .............................. Up to 300 sq ft/hour Clearance .... Cleans up to 1” from a vertical surface

The Desco SP-90 is ergonomically designed to get the operators off their knees and on their feet. The machine excels at edge cleaning operations and pre/post weld cleaning. Great for removing preconstruction primer. A unique feature of the SP-90 is the ability to rotate the motor 0-90 degrees.

Specifications:     Weight 32 lbs.   Power Required 110 volts, 15 amps Power Cord 8', 14-3 gage, grounded Motor 2.2 HP,  6,000 rpm Arbor 5/8"- 11 Abrasive 8" Radial Bristle 
 

The Descobrader offers the same applications as the MiniFlushplate and the FX Tool in a convenient walk behind model. The multiple abrasive heads allow for a variety of applications, including SSPC Sp.11. The optional dust shrouds make it possible to be productive and work in a clean environment. The Descobrader is offered in three different models to meet any power preference. Quick head change outs, ease of operation, versatility, and low maintenance makes this a machine that should be in any tool inventory.
The Descobrader can be used for removing rust and paint or profiling and grinding. This machine was engineered to incorporate an in-line positive adjustment lever that allows precise adjustment of the head at the working surface. The latest addition to the Descobrader line is the Descobrader Weld Cleaning System which dramatically reduces costs and was designed specifically for industries involved with extensive weld cleaning

Features and Specifications 

Coverage: Up to 400 square feet per hour  5.25 inch cleaning swath  Cleans to within 1.25 inch of vertical surface  Removes coatings up to .5 inch thick

Power - Air: 4 hp at 125 cfm and at 80-90 psi

Power - Electric: 5 hp in 220 single phase  220 three phase and 440 three phase  Comes with 25' of 14 gauge electrical cord, 16 amps with 220 three phase  8 amps with 440 three phase

Power - Gas: 5 hp 

Model 40 Features and Specifications Stop repetitive motion syndrome. Using the latest technology for vibration suppression, this dust free needlegun, operates virtually motionless. Low vibration and high blow frequency results in less operator fatigue and increased production. 3-cfm air requirement allows this needlegun to operate on a limited air supply.

Needles: 28 - 3mm or 58 - 2mm needles

Weight:  7.9 lbs.

Length: 11 7/8"

Stroke: 7/8" @ 3400 BPM

Air Requirement: 90 psi @ 3 cfm

Model 40EX Features and Specifications:

The Model 40EX is the Model 40 needlegun with an extended reach handle. It has all great features of the standard Model 40 needlegun with a long handle enabling operation from a standing position.  This ergonomic design of low vibration and extended reach make this needlegun a first choice for vertical applications.  Plus, the back-saver and knee-saver features reduce operator fatigue and boost productivity. 

Needles: 28 - 3mm or 58 - 2mm needles

Weight: 13 lbs.

Length: 55"

Stroke: 7/8" @ 3400 BPM

Air Requirement: 90 psi @ 3 cfm

2" & 3" Die Grinder Features and Configurations The dust free mini-die grinder was designed as a detail tool and to clean hard to get at areas. Any place you can put your fist into the mini-die grinder can clean it dust free. Convenient Roloc system allows for coated abrasive use as well as conditioning type discs. Offered as a bare tool or with a 3" floating shroud and in 2" and 3" fixed-head models. Systems available.

Specifications: 

Pneumatic 2"- Weight 2.5lbs, 3"- 3lbs, Length - 2"- 6", 3"- 7"; Power 90psi @ 14 cfm; RPM - 12000; Collet Size 1/4" 

Electric 2"- Weight 7 lbs. 3" 7.5 lbs.   Length - 2" - 8", 3" -  9" Power  110 volts, 9 amps, RPM -10,000 Collett Size  N/A

Extended Reach Tool The Desco Extended Reach Tool is our most recent innovative solution to hit the market. By simply coupling our customers’ needs with our engineering controls, Desco has once again forged its niche in the surface preparation industry. Our ergonomic design keeps the head of the tool where it needs to be with ease and control. The adjustable handle allows for ambidextrous use while the pneumatic actuation lever gives the user control over the air-generated power. Also available as a hand-held tool.

Specifications:      Weight 5 lbs.    Length 5'   Air Required 90 psi @ 14 cfm     Speed, no load 12,000 rpm
 

4" & 4.5" Right Angle Sander Features A dust free, medium sized sander that’s high in production. Offered in both pneumatic and electric models. The 4" tool uses the Roloc backup pad and can use either the coated abrasive discs or conditioning discs.* The flat shroud allows for edge cleaning. The 4.5" tool uses a center-nut style backup pad for coated abrasive and a hook and loop style back-up pad for conditioning discs. Systems and kits available.

Specifications:  

Pneumatic: Weight 4 lbs. 8 lbs.   Length 9" Power Required 90 psi @ 18 cfm RPM 12,000 Arbor 5/8"-11

Electric: Weight 8 lbs, Lenght 10", Power Required 110 volts, 9 amps, RPM 10,000 Arbor  5/8"- 11 

Double Edge Web Scaler Applications and Specifications The Double Edge Web Scaler is a high production tool designed to perform pre-weld preparation on girder, web plate, and other ferrous materials up to 2" thick. Due to the design of the Double Edge Web Scaler, both top and bottom surfaces may be cleaned in a single pass.

Applications: • Mill scale removal • Pre-weld preparation • Coating removal • Bridge construction • Ship construction • Surface profiling (shot-blast like)

Specifications:

Weight 47 lbs.

Motor - Two each @ 3/4 hp RPM 1,680 - 1,750, 39 CFM Each Motor

195.051.1 -  1" Web scaler, with bristle

195.051.2 -  1 5/8" Web scaler, with bristle

195.27621 - Bristle reload, 36 grit, 6"x 1 5/8"