SiloxoShield I & II Coating Features

Formulated by Navy Research Laboratory, SiloxoShield® polysiloxane topside coatings have been scaled and manufactured exclusively by NCP Coatings. SiloxoShield topside coatings have superior UV stability to conventionally available products on the market today. Imagine a step-up in industrial polysiloxane coatings: SiloxoShield possesses urethane-like quality without the need or use of hazardous isocyanates.

• Full range of both Federal 595 and customer specific colors
• Low VOC, HAP-free formulations
• LSA formulations available
• Superior color and gloss retention
• Improved chemical and abrasion resistance over typically available 2-component polysiloxanes
• Improved cleanability and hydrocarbon resistance
• SiloxoShield I’s single-component (1K) formulations are made for easy application: no mixing of A & B components required

SiloxoGrip® is a step up in industrial polysiloxane coatings. Formulated by the Navy Research Laboratory (NRL) and manufactured by NCP Coatings, this nonskid/nonslip coating is designed for better performance, enhanced durability and extended life-cycles.

The polysiloxane backbone of this coating demonstrates chemical resistance, including more porous resistance to hydrocarbons and other chemicals. That makes SiloxoGrip more durable and easier to clean. This contributes to a topcoat with unmatched color retention when compared to other nonskid/nonslip products.

Ship decks remain cooler and won’t increase a ship’s thermal load. SiloxoGrip retains a high coefficient of friction in wet and dry environments alike, making its nonskid/nonslip properties more effective than ever.

Finally, this product looks great!

SiloxoGrip coating is amine blush resistant and easy to apply. It’s ideally suited for highly humid and low ambient temperature industrial environments. New low viscosity ingredients make application easier than ever. Mix for at least five minutes, then paint or spray for quick and lasting results.

We meet all NRL and marine specifications. Use SiloxoGrip is the nonskid/nonslip coating for some of the world’s harshest environments. This deck coating lasts more than three times longer than less advanced epoxy resins.

Don’t leave the finish, durability or true pigment of your deck coating up to chance – rely on SiloxoGrip, the global leader in polysiloxane coating.

SiloxoGrip Nonskid & Nonslip Coating Features

• Easily cleaned
• Durability in extreme weather conditions
• Low solar absorption
• Coating can be applied by rolling or spraying
• 24 hour dry time
• Repels hydrocarbons

DynaGrip® N-9852A is a 2-component urethane coating. Highly flexible, non-skid, impact resistant, UV-stable. Available in ultra-fine, fine, medium-coarse and coarse texture profiles.

It’s designed to replace adhesive non-skid tapes that are prone to delamination.

DynaGrip has excellent durability, color retention and stain resistance. It can be applied as-is, custom color formulated or top-coated with 2K urethanes in a desired color. DynaGrip can be either roll or spray applied.

DynaGrip was designed for applications where expansion and contraction or the flexing of the substrate may be a concern. Use on diamond plate, aluminum-hulled boats and vessels—wherever extra footing is desired.

DynaGuard Smooth®

DynaGuard® is NCP’s 2-component urethane coating. Choose DynaGuard Smooth® when a highly flexible, impact-resistant and UV-stable finish is demanded. DynaGuard is ideal for trailer, agricultural, off-road and heavy equipment manufacturers seeking impact resistance and color retention for their finished goods. DynaGuard Smooth can be formulated in a full range of custom colors to meet your company’s or customers’ needs. Apply via conventional pressure feed, airless or air-assisted airless spray equipment.

DynaGuard OR®

When tough bedliner qualities are wanted, consider DynaGuard OR® (orange peel). This is a 2-component urethane coating engineered to be highly flexible, impact-resistant and UV stable. No fading! And no need for expensive plural-component equipment or dedicated bedliner spray booths, unlike applying traditional polyurea bedliners. For DynaGuard OR, use either conventional pressure feed systems for larger production runs or convenient handheld, off-the-shelf undercoating spray guns. DynaGuard OR comes in black (N-9564A) as a standard color; custom colors available. 

NCP Coatings: designed with your market in mind

Whether fishing, playing or relaxing, recreational boat owners understand a marine environment demands superior coatings performance. Expect it from DynaBoat™, NCP’s product line of primers, topcoats, enamels, nonskid/nonslip and zero-to-ultra low VOC coatings. DynaBoat™ coatings share a lineage with those developed for the US Navy. Imagine how it can work for you. We have. And while there is a formula for every coating, discover the NCP difference: an engaged technical support team to help you deliver the best product to your customers.

PRIMERS

1 Pack Wash Primer (N-4718)

A non-acidic, chrome free metal pretreatment designed to promote the adhesion of primers and topcoats to various metal substrates. This metal pretreatment is very well suited for general industrial applications and when properly topcoated, gives corrosion and humidity resistance over aluminum and steel offering many of the benefits of alodine and bonderite metal.
VOC 7.22 lbs/gal

Gel Prime (N-7317)

Promotes excellent organic adhesion and superior long-term corrosion protection. Exhibits superior post-paintability and effective on aluminum and stainless steel. Eliminates the need for two rinse stages and a chrome reduction system. Significantly reduces waste treatment system costs including sludge disposal.
VOC 0.

Wash Primer (N-10416A/B)

Zinc chromate acid etching wash primer. This product is suitable for steel, aluminum providing superior adhesion and corrosion resistance when used as part of a recommended OEM paint system.
VOC 6.27 lbs/gal

TOPCOATS

Air Dry Enamel Low Gloss Coating 1K

(N-10119 Dead Grass Green N-10124 Marsh Tan – all camo colors including shadow grass, desert brown)
VOC 4.4 lbs/gal

Air Dry Enamel Low Gloss Stencil Coating 1K

(N-8086 Flat Black N-8992 Flat Brown – all camo colors including charcoal and shadow grass).
VOC 4.4 lbs/gal

Acryhyde HD 2K Polyurethane

High solids coating with 90+ gloss, 2K stage polyurethane. Offers excellent color and gloss retention while offering superior impact and chip resistance not normally found in polyurethane technology.
VOC 3.5 lbs/gal Mixed Ratio 3:1 T-422R
Solid colors: N-10319A Jet Black, N-10417A White, N-10418A Coastal Green, N-10419A Desert Sand, N-10422A Bright Silver
Clear Coat: N-10421A
Metallic colors: N-10423A Black, N-10423A Blue, N-10425A Ruby, N-10426A Charcoal

Dyna-ZV™

Dyna-ZV™ is NCP’s new line of zero to ultra-low VOC line of topcoats.
Engineered for marine markets, Dyna-ZV has excellent color and gloss retention with superior impact and chip resistance not normally found in polyurethane technologies. Dyna-ZV is an excellent coating for the OEM market looking to increase the longevity of products in the field through coatings performance.
The 190 Series [two-component acrylic polyurethane topcoat] is buffable and has excellent color and gloss retention, chemical resistance and distinction of image not normally found in polyurethane technologies.
The 290 Series [two-component acrylic/fluorinated polyurethane topcoat]shares the same features as 190 Series with better weatherability and chip resistance.

Founded in 1948, NCP Coatings Inc. takes great pride in supporting the men and women of the U.S. military through direct efforts and global distribution. NCP Coatings Inc. offers a full line of DynaSpec® QPL’d military-specified ground-based defense coatings. Following the stringent guidelines of ARL and CCDC, we produce the highest quality products possible to meet U.S. military demands.

MIL-DTL-53039 CARC (Chemical Agent Resistant Coatings) Topcoats

NCP’s HAP-free line-up includes our SmartTouch aerosol touch-up versions of this coating.

MIL-DTL-64159 Water Reducible CARC (Chemical Agent Resistant Coatings)

A complete water-reducible CARC system that is HAP free with low VOC. It has excellent application and touch-up properties. This water-reducible topcoat is used in conjunction with our approved water-reducible MIL-DTL-53030 epoxy primer.

Dyna-ZV™ is NCP’s new zero to ultra-low VOC line of coatings. Engineered solutions for the amusement park, agriculture, general aviation, fleet, heavy industrial equipment and marine markets. Dyna-ZV has excellent color and gloss retention with superior impact and chip resistance not normally found in polyurethane technologies. Dyna-ZV is an excellent coating for the OEM market looking to increase the longevity of products in the field through coatings performance.

Specification

MIL-DTL-24441D, Epoxy Polymide Type III

These epoxy polyamide systems are formulated for immersion service and to protect surfaces from environmental attack. Primary usage: over steel and aluminum in marine and industrial environments where a hard, durable, chemical resistant coating is desired. Typically applied as a two-coat system.

MIL-DTL-24441D Epoxy Polymide Type IV

These epoxy polyamide systems are formulated for immersion service and to protect surfaces from environmental attack. They are used over steel and aluminum in marine and industrial environments where a hard, durable, chemical resistant coating is desired.

MIL-PRF-24635 Silicone Alkyds (Standard, LRC, LSA and LSA/Non-Stain versions)

This product is available in a full range of colors. It is a co polymerized silicone alkyd enamel designed to protect ship topsides against the sun’s rays and the harsh marine environment. This QPL approved coatings system is available in Standard, LRC (Low Reflective Coating), LSA (Low Solar Absorbency) and LSA/Non-stain versions. Offered in both conventional Type II 340 grams/liter (2.8 VOC) and Type III 250 grams/liter (2.08 VOC) versions.

MIL-PRF-24635 Silicone Alkyd Enamel Type II, Class1

These products are a high gloss copolymerized silicone alkyd enamel to be used on primed, metal, glass reinforced plastic, and plastic/composite surfaces. These products exhibit excellent color and gloss retention.

MIL-PRF-24635 Silicone Alkyd Enamel Type II, Class 2

These products are a semi-gloss copolymerized silicone alkyd enamel for use on primed, metal, glass, reinforced plastic, and plastic/composite surfaces. These products exhibit excellent color and gloss retention.

MIL-PRF-24763 Acrylic Emulsion Coatings (Standard and LSA Versions)
MIL-PRF-24763 Acrylic Emulsion Enamel, Type II, Class 2

An acrylic emulsion enamel with exceptional gloss and color retention intended for use on primed metal, particularly on smooth exterior metal.

MIL-PRF-24763 Acrylic Emulsion Enamel, Type II, Class III

An acrylic emulsion enamel with exceptional gloss and color retention intended for use on primed metal, particularly smooth exterior metal. These coatings are low reflective and have designed to be highly absorbent in the visible and near IR portion of the electromagnetic spectrum.

TT-P-645B Alkyd Primer Navy Formula 84

This is an anticorrosive alkyd primer primarily for use as a general primer for steel and properly prepared aluminum.

TT-P-28 High Temperature Aluminum

High heat aluminum is designed for use on superheated steam lines, boiler casings, boiler casings, boiler drums, superheated headers and other applications where resistance to temperatures up to 1200°F is desired.

MIL-DTL-15090 Enamel, Equipment, Light Gray (Navy formula #111)

Gray alkyd enamel for interior and exterior shipboard use, 340 gram/liter (2.8 VOC). Meets full specifications for naval and marine coating and paint applications.

MIL-PRF-24596 Non-Flame Emulsions (Water Based)

These products are fire retardant, non-intumescent coatings designed for use on interior spaces of surface ships and submarines. This enamel resists spontaneous ignition when heated by conduction through a metal substrate. This enamel does not support combustion.

MIL-PRF-24596 with Amendment 1 Fire Retardant Chlorinated Alkyd – Solvent Based

This enamel resists spontaneous ignition when heated by conduction through a metal substrate. The enamel does not support combustion. Complies with Military Specification: MIL-PRF-24596B, Classes 1 & 2, Grade C, Applications A & B.

MIL-PRF-24607B with Amendment 2 Chlorinated Alkyd Enamel

A semi-gloss enamel designed primarily for interior industrial marine applications where flame resistance is required.

MIL-DTL-24631 Navy Formula 184 Epoxy

An epoxy polyamide system formulated for use in demanding high performance environments. It is a self-priming coating that has outstanding adhesion and good flexibility.

MIL-DTL-24631 Navy Formula 187 Urethane

Camouflage paint for submarines, Type II. This two-component polyester urethane coating is a highly flexible, weather resistant topcoat.