CAIG Laboratories

Marine greases currently do a good job lubricating and protecting mechanical devices and equipment.  However, they do not address a common issue that affects all metals, . . . . . . existing oxidation/corrosion on the surfaces.

CAIG’s DeoxIT® L27 Greases do a great job lubrication and protecting metal surfaces, they also contain special additives which remove and displace most surface oxidation and corrosion on metals.

Manufactured in semi-solid form for use as a combination cleaning, deoxidizing, protecting and lubricating preparation.  Greases protect against oxidation (galvanic corrosion) and are free of mineral acids, sulphurs, alkalis and other noxious components aggressive to metals.

The infusion of DeoxIT® Dx100L into the formulation provides an additional film on the metal surface to remove/displace corrosion and provides a moveable/flexible protective barrier. This is important when, and if, the grease is disturbed and separates from the metal surface.  When the grease is first applied, the infused DeoxIT® Dx100L transfers to the metal and coats the entire surface; sealing and protecting the metal even if the grease is separated from the surface (vibration or mechanical movement). No other grease does this!

For severe oxidation and corrosion, quartz particles are available in the greases.

DeoxIT® D-Series contact/connector treatment, dissolves oxides and sulfides that form on metal surfaces. This restores the contact’s integrity and leaves a thin microscopic layer that protects the metal. Special additives improve conductivity and prevent dissolved oxides from re-attaching, keeping them in suspension and allowing them to be easily dispersed by the mechanical action of the contact.