Tested and certified by US Coast Guard accepted independent laboratory.
Steady mode visibility exceeds 3 nautical miles.
Flashing light travels 2 nautical miles.
It comes standard with mounting magnets (70 lb. pull strength).
Steady mode will last 30 days using four 6-volt batteries.
Flash mode will last 120 days using four 6-volt batteries.
Steady on mode is available in red, green, and clear colors.
Flash mode is available in amber.
Available with optional Pilot Location Light attachment for the amber barge light.

Ordering Codes: Port 200SCR, Starboard 200SCG, Stern 200SCC, Amber Flashing 200SAA.

• Tested and certified by US Coast Guard accepted independent laboratory.
• Meets one nautical mile visibility requirement.
• White LEDs last 100,000 hours.
• Solid state circuitry turns light on at dusk and off at day-break.
• In steady mode the battery will last 60 days.
• In flash mode the battery will last 120 days.
• Available with optional magnetic base.

• Tested and certified by US Coast Guard accepted independent laboratory.
• LEDs last 10,000 hours.
• Steady burn light travels 2 nautical miles for up to 21 days.
• Flashing light travels 2 nautical miles for up to 60 days.
• Solid state circuitry turns light on at dusk and off at day-break.
• Steady mode is available in red, green, and clear.
• Flash mode is available in amber.
• In steady mode the battery will last 20-25 days.
• Flash mode will last 60 days.
• Available with optional magnetic base.

The ACR Auto HemiLight™3 flashing survival light attaches to almost any style life jacket with a quick and easy installation. Smaller than other approved lights, the HemiLight™ɜ features rounded edges to maintain the integrity of inflatable life jackets and meets USCG, MED and SOLAS requirements. The high-intensity flashing LED light automatically activates for 20+ hours when it comes in contact with salt or fresh water, and can be deactivated simply by pushing the red button. Attachment loops accommodate up to 5 cm (2 in) wide webbing, and the marine-tough design ensures years of useful service. ( Bulk- Not Carded )

Operates on 2 AA Lithium batteries and the batteries are user-replaceable. USCG/MED/SOLAS approved for use around the world and this durable LED marker light. Bright light in all directions (360° visibility)
UV resistant polycarbonate case
Lightweight and compact in size
Easy bracket installation
Bracket is included and maintains same hole pattern as SM-2 for easy retrofit
Automatically rights itself and activates when in the water
High intensity LED strobe
Floats upright in all conditions
Minimum 40 hours continuous operating life at 30oC (86oF) or over 24 hours at -1oC (30oF)
User-Replaceable AA Energizer L91 Lithium Batteries (Not Included)

• USCG approved Type V Work Vest with Type III swim performance
• Articulating head support is out of the way for comfort and only supports the unconscious wearer’s head in
water in case of emergency or rescue
• Harness access on back panel to work universally with fall protection harnesses
• Highly visible orange color as required by USCG
• Split foam system with vent that surrounds the front torso more uniformly and feels less bulky
• Contoured and lighter weight foam for freedom of movement and longer life than PVC
• Durable polyethylene foam which is impervious to absorption chemicals and oils
• Mesh liner and back for added breathability and comfort, keeping you cool all day
• Molle to attach accessories
• Designed for minimal snag hazards
• SOLAS grade retro-reflective on front and back for greater visibility
• Adult universal sizing- chest size 30″-52″
• Tough construction and components to meet rigorous USCG requirements
• Vinyl piping on edges of jacket to reduce chafing for added longevity
• Patented design

Type V, inherently buoyant, 3-piece vinyl coated foam work vest. This work vest has a slot in the back to facilitate wearing over a fall restraint harness. Our arrangement allows the snap hook and lanyard to be worn comfortably outside of the jacket. When worn with a harness, adjust harness for proper fit with “D” ring located in the middle upper back. Don life jacket over harness and place “D” ring through slot in back pad of life jacket. Adjust back pad using the aluminum slides to line up slot with “D” ring. Keep front fastened and adjust for snug fit. Attach lifeline to back “D” ring if required.With reflective tape.

The SturdiLED® is a super-rough service LED floodlight designed for the world’s toughest environments. With its extremely durable and compact design, the fixture is suited for general vessel deck lighting, track lighting for mine shovels and blasthole drills as well as other demanding applications. The fixture outputs up to 2900 lumens on 37W of energy and comes standard with a 45-degree beam angle.

Built with marine grade cast aluminum housing and an impact-resistant and UV-stable lens, making it ideal for outdoor use. The standard rugged shock mount base provides maximum protection against shock and vibration. The fixture features an extended heat sink designed to maximize heat dissipation, keeping the LEDs cool and extending their lifetime.

An optional visor is available to further protect the lens, direct light and reduce glare. A red LED (625 nm) light option is available for night vision deck lighting or general indication lighting. When a narrower beam is desired, we offer a 28-degree optic lens kit.

The Sabik M650H self-contained LED lantern for buoys and minor beacons is a low-maintenance, cost-effective solar LED marine lantern. This solar marine lantern is most commonly used as marine aids-to-navigation marking, marina lighting, dock lighting, and port lighting. The high-performing Sabik M650H includes a battery with life expectancy up to 5 years that has a visible range of 2 to 4 NM.

Available in standard IALA colors: Red, green, White, Yellow, and Blue. This lantern is easy to install on any structure using 3 x M6 bolts on a 150mm diameter.

• High-efficiency solar cells with bypass and blocking diode function.
• Premium grade UV resistant, polycarbonate/polysiloxane co-polymer body and lens material
• Color-specific temperature corrected LED drivers provide consistent intensity under all operating conditions
• SLA battery with ventilated battery compartment
• Vertical divergence > 8º (FWHM)
• IP 68 rated. Double O-ring sealing with waterproof vent
• Programmable with On-Board User Interface, USB port, or optional wireless IR-Programmer
• Optional ON/OFF switch, external charger, and integrated GPS synchronization