HCT LLC | WaterSOLV™  

A sustainable and water conservation solution. A highly acidic, extremely concentrated mixture. Applied to water hardness conditions, with additional amounts of product added where remediation of soil is necessary. May also be applied topically but usually not the best approach - too fumy. Primary purpose is to treat water and fix soils by dissolving bonds of bicarbonates, valence and chlorides (minerals, metals & nutrients) to form always re-hydratable nutrition, as it was in water, prior to accumulating as insoluble complexes in our soils. At the same time, detoxifying sodium and chloride. Use rates are typically 1/10th that of sulfurous acids where 1 gallon of Curative displaces 9 gallons of 93% sulfuric acid, and the demand to apply gypsum for available calcium, or adding calcium to complex with sodium is no longer needed. Gradually restores soil pore space and lowers the associated bulk density. Not pH dependent, operates at pH values near basic and slightly above. Not corrosive to the skin. Sustainable to vegetation and soil integrity. Ideal for all forms of irrigation, compatible with most fertilizers, apply at discharge side of pump stations by continuous chemical injection. The impacts of the product to soil remediation, available nutrients, vegetation vitality, heat stress resistance and traffic tolerance, uniformity of play and predictability, with offsets and efficiencies that usually cover the entire cost of the WaterSOLV™ Program. Classified as a non-nutrient, Auxiliary Soil and Plant Substance (ASPS) and certified by the California Department of Food and Agriculture. Contains no nitrogen or urea. Performance is guaranteed. Also available in a similar organic formulation.

All-in-one. The power of WaterSOLV™ Curative and WaterSOLV™ BC in one container. Substantially diluted in water for the two products to stay compatible. Extremely user friendly, compatible with most all fertilizers. No need to worry about soils conditions of sodium or NO3-N. Excellent wetting agent to fertilizers. Excellent remediation solution for solving problems from cementation to slosh. May be used at extremely aggressive rates, as much as 500 ppm, on a weekly basis to improve soils – pore space, available nutrition and oxygen while mitigating black layer, iron bacteria and chloride salts and toxicity.
Applied at rates near 1 gl. per acre on a weekly or semi-weekly basis for restoring infiltration and draining, flushing salts and matter (including bio films, bio-matter, black layer, SRB, minerals, metals, paint pigment and organic wastes, inclusive of toxic wastes and gasses).

pHix is considered a gateway product to trial and engagement with HCT’s concentrate products program and chemigation.

Packaging: 5, 30, 55 and 265 gl. containers

You Can Visually See the Difference. If you have calcareous soils, they should be pHixed, with WaterSOLV™ pHix, before using WaterSOLV™ GROW. With the application of WaterSOLV™ GROW on compromised soil / vegetation / root health / vegetation, fruit / vegetable vitality, plants begin to get more oxygen in their root zone, like after a rain, sodium is detoxified, nitrogen converted to nitrate, bio exudates treated. Flushing the soil is not necessary, the anaerobic biomatter is reduced, the aerobic bacteria is assisted, bio exudates are reduced, the plant is getting its oxygenated energy drink, with all the vitamins. WaterSOLV™ GROW is extremely user friendly. It’s very concentrated! Initial applications you usually flood the root zone or troubled areas with water containing the WaterSOLV™ GROW. Usually these areas are not cemented, so opening up the soil surface with pinhole aerification is not necessary. Flood the root bowl on initial treatment, but not to the extent of causing drainage/flushing. Water to Water, don’t water to flush. 1-2 drops in a gallon of water, is suitable for house plants on a as needed watering basis.

Suitable for topical application, but the work begins at the root bowl/zone so it has to be watered in. Pinhole aerification, getting the product into the soil is your best and fastest approach. Compatible with most common fertilizers for topical application. Does not have to be watered in, just watered on. Moderate over application is not often problematic, but continuous over use is. Use as a water treatment and a soil amendment. Topical application rates on soils range from 1 to as much as 6 gallons per acre. Frequency should be weekly until problematic conditions are visually improved.

A sustainable and water conservation solution. For years HCT talks about Minerals, Metals, Microbes and Sodium as a total approach to sustainable water and soil treatment. WaterSOLV™ BC is our solution to microbes and more.

WaterSOLV™ BC is an inhibited yet catalyzed peroxide-based solution to treat slime and black layer (iron and sulfate reducing bacteria), a product that also detoxifies the soluble salts sodium and chloride, that also sequesters soluble mineral and metals to always available nutrition, and finally of which the majority of the product biodegrades to valuable dissolved oxygen and water. We refer to the biodegradation as continuous chemical aerification. Used in combination with WaterSOLV™ Curative a higher degree of peroxide is formed and without the fear of yellowing or damaging vegetation, even at extreme use levels. Ideal for remediating soils suffering from black layer and root rot (technically SRB and its exudates of deadly hydrogen sulfide gas). Ideal for restoring infiltration of water and nutrition in all types of soil, including golf course greens, all cases where primarily biofilms of bacteria are suspected or detected to have formed a sheeting of like plastic wrap (technically called polysaccharide). Also, a core product with WaterSOLV™ Curative where needed, for the ongoing treatment or remediating of drip lines, emitters and or topical biomatter issues. Non-corrosive and usually recommended to be applied at the suction side of pump stations – never into the pond, always into the suction side of the pump station. Classified as a non-nutrient, Auxiliary Soil and Plant Substance (ASPS) and certified by the California Department of Food and Agriculture.

Use Rates: Linear to source water “Total Bacteria” with additional treatment for remediating soil conditions. Usually injected prior to the pump station. Usually from 1 qt. to 1.75 gl. per million gallons of water. Must be kept out of direct sunlight even when in use. See hazards for storage, handling and drainage. NEVER use without access to ample rinse water and eye protection.

Packaging: 5, 53 and 300 gl. containers