APROVE PRODUCTS CO., LTD.

Specifications:

1) Rated Line Pull: 2500lb (1133kg) Single-line
2) Motor: 12V DC, 0.9 HP Series Wound
3) Geartrain: 3-Stage Planetary
4) Gear Ratio: 136:1
5) Wire Rope: 4.8mm*15.24M
6) Synthetic Rope: 5mm*15.24M
7) Fairlead: Aluminum Hawse Fairlead
8) Winch Dimensions: 337mm x 113mm x 115.8mm
9) IP67 Waterproof for Winch Body
10) Low Noise Level < 80 dB
11) Easier Replacement: Able to Replace the Knob from Outside

Specifications:

1) Rated Line Pull: 2500lb (1133kg) Single-line
2) Motor: 12V DC, 0.9 HP Series Wound
3) Geartrain: 3-Stage Planetary
4) Gear Ratio: 136:1
5) Wire Rope: 4.8mm*15.24M
6) Synthetic Rope: 5mm*15.24M
7) Farilead: 4-Way Roller Fairlead
8) Winch Dimensions: 337mm x 113mm x 115.8mm
9) IP67 Waterproof for Winch Body
10) Low Noise Level < 80 dB
11) Easier Replacement: Able to Replace the Knob from Outside

Specifications:

1) Rated Line Pull: 3500lbs. (1589kgs) Single-Line
2) Motor: 12V DC, 1.1hp(825w) Permanent Magnet
3) Control: Handlebar Switch and Remote Switch
4) Geartrain: 3-Stage Planetary
5) Gear Ratio: 136:1
6) Clutch (freespooling): Cam Actuated
7) Brake: Dynamic. Mechanical Brake is Available
8) Drum Diameter / Length: 2.0" / 2.9"
9) Wire Rope: 4.8mm*15.24M
10) Synthetic Rope: 4.8mm*15.24M
11) Fairlead: Aluminum Hawse Fairlead
12) Recommended Battery: 12 Amp / Hour Minimum for Winching
13) Battery Leads: 6 Gauge
14) Finish: Black
15) Easier Replacement: Able to Replace the Knob from Outside
16) IP67 Waterproof for Winch Body
17) Low Noise Level < 80 dB


Endure following tests: 
- Dust Spray Test 
- Water Spray Test
- High/Low Temperature Test for Winch Body and Accessories ( - 40^oC ~ 80^oC)
- 1500 Hours' UV Test 
- 72 hours Salt Spray Test for Steel Cable and Hardware                                                                                                                          
 

**Winch Mount Kits are Not Included. Bolt Pattern for Winch: 3.00" x 4.875"(4 Holes)

Specifications:

1) Rated Line Pull: 3500lbs. (1589kgs) Single-Line
2) Motor: 12V DC, 1.1hp(825w) Permanent Magnet
3) Control: Handlebar Switch and Remote Switch
4) Geartrain: 3-Stage Planetary
5) Gear Ratio: 136:1
6) Clutch (freespooling): Cam Actuated
7) Brake: Dynamic. Mechanical Brake is Available
8) Drum Diameter / Length: 2.0" / 2.9"
9) Wire Rope: 4.8mm*15.24M
10) Synthetic Rope: 4.8mm*15.24M
11) Farilead: 4-Way Roller Fairlead (for S3500 SC)
12) Recommended Battery: 12 Amp / Hour Minimum for Winching
13) Battery Leads: 6 Gauge
14) Finish: Black
15) Easier Replacement: Able to Replace the Knob from Outside
16) IP67 Waterproof for Winch Body
17) Low Noise Level < 80 dB


Endure following tests: 
- Dust Spray Test 
- Water Spray Test
- High/Low Temperature Test for Winch Body and Accessories ( - 40^oC ~ 80^oC)
- 1500 Hours' UV Test 
- 72 hours Salt Spray Test for Steel Cable and Hardware                                                                                                                          
 

**Winch Mount Kits are Not Included. Bolt Pattern for Winch: 3.00" x 4.875"(4 Holes)

Specifications:

1) Rated Line Pull: 4500lb (2040kg) Single-line
2) Motor: 12V DC, 1.48HP Series Wound
3) Geartrain: 3-Stage Planetary
4) Gear Ratio: 166:1
5) Wire Rope: 5.5mm*15.24M
6) Synthetic Rope: 6mm*15.24M
7) Fairlead: Aluminum Hawse Fairlead (for S 4500 SR/S 4500 SRD)
8) Winch Dimensions: 361.5mm x 117mm x 121mm
9) IP67 Waterproof for Winch Body
10) Low Noise Level < 80 dB

11) Easier Replacement: Able to Replace the Knob from Outside

Specifications:

1) Rated Line Pull: 4500lb (2040kg) Single-line
2) Motor: 12V DC, 1.48HP Series Wound
3) Geartrain: 3-Stage Planetary
4) Gear Ratio: 166:1
5) Wire Rope: 5.5mm*15.24M
6) Synthetic Rope: 6mm*15.24M
7) Farilead: 4-Way Roller Fairlead
8) Winch Dimensions: 361.5mm x 117mm x 121mm
9) IP67 Waterproof for Winch Body
10) Low Noise Level < 80 dB

* Constructed of 1.75 Inch Heavy-Duty Steel Tubing
* Provides Additional Protection by Preventing Large Objects from Entering The Cockpit
* Does Not Effect Line of Sight
* Easy, Bolt-On Installation to Factory Roll Cage
* Use High Quality Powder Coating to Protect Against UV Rays from Apparent Fading and Corrosion for Up to 1500 Hours, Which is Superior to the Majority of Competitors
* Works with Factory Roofs
* Designed by Aprove USA

Fitment:
Polaris RZR Pro XP (2020+)
Polaris RZR Pro XP 4 (2020+)

* Constructed from Heavy Duty 1.75 Inch Steel Tubing 
* Provides Full Lower Side Protection Against Rocks, Trees, Obstacles and Debris 
* Outstanding Protection Without Impeding Performance and Sacrificing Ground Clearance
* Stylish Bold Tubes Contour Closely to The Factory Body Lines
* 100% Bolt-On Installation to Existing Factory Locations
* Use High Quality Powder Coating to Protect Against UV Rays from Apparent Fading and Corrosion for Up to 1500 Hours, Which is Superior to the Majority of Competitors
* Sold in Pairs
* Designed by Aprove USA

Fitment:
Polaris RZR Pro XP (2020+)

** Do not work with RZR Pro XP 4 (4 seat) models

* Made of 1.75 Inch and 1.5 Inch Strong, Heavy-Duty Steel Tubing to Ensure Superior Durability
* Provides Extra Strength and Protection for The Rear Body
* Easily Mounts to Factory Locations and Requires No Drilling or Modifications
* Stylish Sleek Design to Match with A Factory Finish Look and Make you Stand Out from The Crowd 
* UV Resistant Powder Coat Finish
* Designed by Aprove USA

Fitment:
Polaris RZR Pro XP (2020+)
Polaris RZR Pro XP 4 (2020+)

* Constructed of 1.75 Inch Heavy-Duty Steel Tubing
* Accommodates Tires Up to 32 Inches  (Tire Is Not Included)
* Mounts Securely and Easily on Roll Cage by Using Two Havey-Duty Casting Clamps without Any Drilling or Cutting  
* Four M12 Wheel Lug Nuts Are Included
* Positions Tire Up to Provide Decent Visibility
* Allowing 22 Inches Clearance Under The Tire Carrier When A Spare Tire Is Installed Even with The Top of Roll Cage
(The spare tire carrier is somewhat adjustable as it can be installed lower or higher on the roll cage to reduce or increase the clearance to the bed.)
* Great for Low Clearance Trailers with Tire Low Profile Location
* Use High Quality Powder Coating to Protect Against UV Rays from Apparent Fading and Corrosion for Up to 1500 Hours, Which is Superior to the Majority of Competitors
* Designed by Aprove USA

Fitment:
Polaris RZR Pro XP (2020+)
Polaris RZR Pro XP 4 (2020+)

* Extend Bed Space when The Tailgate is Open
* Serves as Cargo Divider and Keeps Cargo Separated at Differenct Locations in The Box
* Easy Attached and Removed Using Aprove Twist Lock Anchors (2 Included)
* Provides Several Additional Tie-Down Points for Cargo Security
* Durable Powder Coated Finish
* Designed in USA

Fitment:
Polaris Ranger XP 900 / XP 900 EPS (2013 ~ 2019)
Polaris Ranger Crew XP 900 (2017 ~ 2019) 
Polaris Ranger XP 1000  / Crew XP 1000  (2017 ~ 2021)
Polaris Ranger 1000 / Crew 1000 (2020 ~ 2021)

Note: The bed extender angles down a little on the 2018+ Ranger XP 1000.

* Full Length Protection of The Plastic Side Box
* Provides Several Additional Tie-Down Points for Cargo Security
* Quickly Plug into Box Sides and Secure with Aprove Twist Lock Anchors (4 Included)
* Tool-Less Installation
* Durable Powder Coated Finish
* Sold in Pairs
* Designed in USA

Fitment:
Polaris Ranger XP 900 / XP 900 EPS (2013 ~ 2019)
Polaris Ranger Crew XP 900 (2017 ~ 2019) 
Polaris Ranger XP 1000  / Crew XP 1000  (2017 ~ 2021)
Polaris Ranger 1000 / Crew 1000 (2020 ~ 2021)

* Heavy-Duty Rectangular Steel Tubes Integrated into The Body Shape
* Perfect for Hunting and Farming Applications for Pulling Heavy Loads into Rear Cargo Bed Easily
* Maximum 400 lbs pulling Capacity 
* Accommodates Most 2500 lbs ATV/Compact Winches with 4 Bolt Mounting Holes 4.875"x 3" (124mm x 76mm).  Fairlead Bolt Pattern: 124mm (4.875")
* Easy Plug and Lock with 4 Aprove Twist Lock Anchors 
* Integrated Locations for Winch Tow Hook
* Powder Coated for Long Lasting Durability
* Designed by Aprove USA

Note: Not Include Winch

Fitment:
Polaris Ranger XP 900 / XP 900 EPS (2013 ~ 2019)
Polaris Ranger Crew XP 900 (2017 ~ 2019) 
Polaris Ranger XP 1000  / Crew XP 1000  (2017 ~ 2021)
Polaris Ranger 1000 / Crew 1000 (2020 ~ 2021)

* Increased Protection to The Side of Vehicle
* Integrates Boot Scraper Helps Keep Interior Clean
* Integrates Step for Easy Ingress
* Easy Installation with Integrated Mounting Locations
* Sold in Pairs
* Designed in USA

Fitment:
Polaris Ranger XP 900 / XP 900 EPS (2013 ~ 2019)
Polaris Ranger XP 1000 / XP 1000 EPS (2017)

** Do not work with MY18+ Ranger XP 1000
** Do not work with all Crew models

* 2-Piece Robust Steel Construction with Multiple Tie-Down Points Provides A Large Increase in Cargo Capacity for Keeping Extra Cargo and Another Spare Tire
* Integrated Slotted Holes on The Front and Rear of The Rack Can Provide A Variety of Combination for Large or Small LED Bars and Corner Work Lights (Lights are not Included)
* Quick and Easy Bolt-On Installation to The Top of Your Polaris Ranger
* Work with or without The Factory Plastic Roof
Note: Drilling to the roof is required.  May not work with all roofs
* The Rack Dimension: 54 Inch L x 34 Inch W x 7.7 Inch D.  Cargo Area Measures Approximately 50 Inch x 26 Inch
* Powder Coated for Long Lasting Durability
* Designed in USA

Fitment:
Polaris Ranger XP 900 Two Seat Models  (2013-2019)
Polaris Ranger XP 1000 Two Seat Models  (2018-2021)
Polaris Ranger 1000 Two Seat Models  (2020-2021)

* Designed to Install on The Left, Right and Front Rails of The Ranger Box with The Tire Placed Inside of The Box
* Adjustable to Accommodate up to A 28" Tire
* Compatible with Aprove Cruiser Bed Extender and Bed Rails  ( If using the tire carrier with Cruiser bed extender, the tire would have to placed on the front rail of the bed.)
* Includes Four M12 Cap Nuts and M12 Nuts to Accommodate Different Rim Styles
* Installation Hardware and 2 Aprove Twist Lock Anchors Included
* Powder Coated for Long Lasting Durability
* Designed in USA

Fitment:
Polaris Ranger XP 900 / XP 900 EPS (2013 ~ 2019)
Polaris Ranger Crew XP 900 (2017 ~ 2019) 
Polaris Ranger XP 1000  / Crew XP 1000  (2017 ~ 2021)
Polaris Ranger 1000 / Crew 1000 (2020 ~ 2021)

* Designed to Provide Superior Protection for The Front Body, while Maintaining An Edgy Look that Flows with The Look of The X3
* Made of Tough 1.5 Inch Sq. Steel Tubing 
* Integrates Mounting Points for Two Small Lights or 12 Inch LED Light Bar
* Powder Coated Finish
* Compatible with Other Aprove accessories 
* Designed in USA

Fitment:
Can-Am Maverick X3 (2017 -2021)

** Do not work with 2018+ Can-Am Maverick X3 X MR and X RC models

* Made of 1.75 and 1.25 Inch Diameter Heavy-Duty Steel Tubing
* Rugged Look matches with The Talon Style and Protects Entirely The Front End of The Machine
* Designed to Accommodate Most Winches Rated up to 4500 lbs
Available with Winch Mounting Bolt Pattern: 4 Hole 4.875" x 3" and 4 Hole Wide 6.60" x 3"
* Come with An Additional Fairlead Adapter Plate to Accommodate Different Fairlead Bolt Patterns of 4.875" and 6.00".  "Do not work with 4500lb 4-Way Roller Fairlead"
* Integrated Upper and Lower Light Ports
* Easy Bolt-On Installation.  Use The Same Mounting Locations as The Factory Bumper
* Finished with UV Resistant Powder Coating
* Designed by Aprove USA

Note: Lights, Winch and Fairlead Are Not Included

Fitment:
Honda Talon 1000X (2019-2021) 
Honda Talon 1000R (2019-2021)
Honda Talon 1000X-4 (2020-2021)

* Strong, Durable and Multi-Diameter Steel Tube Construction
* Act as A Tailgate with Integrated Tie-Down Points to Secure Tools, Coolers or Cargo 
* Swing Open 90 Degrees for Easy Access to The Bed and Cargo
* Easy Assembly and Installation on to The Factory Cage
* 9 Inch Tall Sides Increase Cargo Carrying Capacity
* UV Resistant Powder Coat Finish
* Designed by Aprove USA

Fitment:
Honda Talon 1000X (2019-2021) 
Honda Talon 1000R (2019-2021)
Honda Talon 1000X-4 (2020-2021)

* Constructed of 1.75 Inch Heavy-Duty Steel Tubing
* Provides Additional Protection by Preventing Large Objects from Entering The Cockpit
* Does Not Effect Line of Sight
* Easy, Bolt-On Installation to Factory Roll Cage
* UV Resistant Powder Coat Finish
* Works with Factory Plastic Roof
* Designed by Aprove USA

Fitment:
Honda Talon 1000X (2019-2021) 
Honda Talon 1000R (2019-2021)
Honda Talon 1000X-4 (2020-2021)

* Laser Cut from 3mm Thick Q235 Steel
* Designed to Accommodate Most 36 - 43 Inches Curved or Straight Light Bars
* Works with Factory Roof as well as Many Others
* Easy Bolt-On Installation to Existing Holes on Roll Cage
* Includes Two Sets of Mounting Tabs
(The wider tabs would function for the 43 – 38 inches bars and the narrower tabs would function with the 41 – 36 inches bars.)
* Finished with UV-Resistant Black Powder Coating to Protect Against Corrosion
* Designed by Aprove USA

Note: Not compatible with full windshields

Fitment:
Honda Talon 1000X (2019-2021) 
Honda Talon 1000R (2019-2021)
Honda Talon 1000X-4 (2020-2021)

* Protects The Rocker Panels Against Rocks, Trees, and Other Trail Obstructions
* Made of Heavy Duty 1.75 Inch Steel Tubing
* Mounts to Factory Mounting Locations
* Durable Black Powder Coated Finish
* Sold in Pairs
* Designed by Aprove USA

Note: The lower side panel of the machine needs to be trimmed to accommodate both the OEM and Aprove nerf bars.

Fitment:
Honda Talon 1000X Two Seat Model (2019-2021)
Honda Talon 1000R Two Seat Model (2019-2021)

** Do not work with Talon 1000X-4 (4 seat) models

* Strong, Heavy-Duty Steel Tubing
* Provides Extra Strength and Protection for The Rear Body
* Easily Mounts to The Frame, No Modifications Required
* Aggressive Design Follows The Body Lines of Machine for A Finished Look
* UV Resistant Powder Coat Finish
* Designed by Aprove USA

Fitment:
Honda Talon 1000X (2019-2021) 
Honda Talon 1000R (2019-2021)
Honda Talon 1000X-4 (2020-2021)

* Constructed of 1.75 Inch Heavy-Duty Steel Tubing
* Fits Up to A 32" Spare Tire  (Tire Is Not Included)
* Mounts Securely and Easily on Roll Cage by Using Two Casting Clamps without Any Drilling or Cutting  
* Four M12 Wheel Lug Nuts Are Included
* Positions Tire Up to Provide Decent Visibility
* 22" Clearance Under The Tire Carrier Can Save Most Cargo Space
* Great for Low Clearance Trailers with Tire Low Profile Location
* UV Resistant Powder Coat Finish
* Designed by Aprove USA

Fitment:
Honda Talon 1000X (2019-2021) 
Honda Talon 1000R (2019-2021)

APROVE winch is designed with the advanced dual speed technology, combined with style and unique mechanical design.

FEATURES

• DUAL SPEED - High: 19.6m/min, Low: 10.3m/min.
• IP67 WATERPROOF
• WIRELESS REMOTE
• LOW NOISE < 95 dB
• 150A OVERCURRENT PROTECTION
• LARGER, ERGONOMIC KNOB DESIGN
• PASSING DURABILITY TEST
• STRICT QUALITY CONTROL BEFORE PACKAGING AND SHIPPING
• DYNEEMA CABLE IS ALSO AVAILABLE

* Specifications are subjected to change without prior notice!

* Allows Holding a Spare Tire in Place
* Light Weight and Strong 1.5 Inch Sq. Steel Tubing Design 
* Tire/Wheel Mounts Securely with Integrated Four Lug Nuts
* Easy, Bolt-On Installation
* Powder Coated for Long Lasting Durability
* Fit Up to A 32 Inch Tire (Without Roof Installation)
* Designed in USA

Fitment:
Can-Am Maverick X3 (2017 -2021)

* Designed to Provide Superior Protection for The Rocker Panels, while Maintaining An Edgy Look that Flows with The Look of The X3
* Made of Tough 1.5 Inch Sq. Steel Tubing 
* Protect Vehicle's Lower Sides Without Affecting Ground Clearance
* Powder Coated for A Durable Finish
* Compatible with Other Aprove Accessories
* Sold in Pairs
* Designed in USA

Note: Drilling to Machine is Required

Fitment:
Can-Am Maverick X3 Two Seat Models (2017 -2021)

** Do not work with 2018+ Can-Am Maverick X3 X RC
** Do not work with all Max (4 seat) models

* Made of 1.75 Inch Steel Tubing with Durable Powder Coated Finish
*Extra Protection Against Objects from Entering The Cockpit
* Matches The Racing Look of The X3 Without Limiting Visibility
* Easy Installation
* Compatible with Aprove or Factory Roof
* Designed in USA

Fitment:
Can-Am Maverick X3 (2017 -2021)

* Bolts-On Installation with No Drilling Required
* Accommodates up to 4 Spotlights or One Large LED Light Bar
* Powder Coated for a Durable Finish
* Compatible with Factory Roof and Windshield
* Designed in USA

Fitment:
Can-Am Maverick X3 (2017 -2021)

* Multiple Points of Adjustment Provide Simple Installation and The Best View Possible
* Durable Metal Housing Provides Great Looks and Additional Protection for The Glass
* Glass is Placed on a Ball Socket Joint for Precise Viewing Angle Adjustment and to Allow The Housing of The Mirrors to Stay 
* Break Away Feature Allows The Mirror to Break Away in Case of Impact or to be Folded in for Tight Trails and Trailering
* Preset Detents Allow The Mirror to be Easily Returned to Its Original Position and Provides A Locked Position when Folded in
* Adjustable Spring Tension to Provide Consistent Breakaway Activation Throughout The Life of The Mirror
* Low Profile Mounting Bracket Rotation Allows The Mirrors to be Installed at Varying Heights Based on User Preference and Machine Designs
* Mirror Dimension: 4.77 Inch x 7.2 Inch
* Designed to Fit 1.875 Inch or 1.75 Inch Round Tubing
* Sold in Pairs
* Designed in USA

Fitment: 
Fits 1.875 Inch Round Roll Cages
Reference Compatible Models: 
Can-Am Maverick X3 
Kawasaki Teryx
All UTVs with 1-7/8 Inch Roll Bars

Note: Does not work with Pro-Fit cage and Windshield