Simple and Cost-Effective

Wireless remote monitoring systems are one of the most versatile, cost-effective solutions for sensor systems that cover a broad distance or are otherwise hard to reach. The SignalFire RANGER transmitter is sensor agnostic, connects quickly and easily, and provides power to even the most remote sensor — all without the effort and cost of trenching or cabling. Paired with your existing cloud or the SignalFire cloud, the RANGER system is the simplest way to access all of your sensor data from one platform. Whether you’re converting an existing system or building a new system, going wireless with SignalFire means you can go live and start accessing your sensor data almost immediately.

Compatible with a wide range of existing technology and powered by an optional solar panel or a battery that lasts up to 10 years, the RANGER transmitter makes monitoring easier and more affordable. SignalFire’s system requires no trenching or cabling, greatly reducing installation cost and time. Once the RANGER transmitter is connected to your sensor, your system is powered and ready to deliver data directly to the cloud, where you can easily access it from your laptop, PC, or mobile device and start realizing the potential of insight.

The SignalFire Pressure Ranger is an IoT (internet of things) cellular pressure transmitter using the latest LTE CAT M1 technology for sensors and fully integrated with SignalFire’s cloud monitoring and alarming services. The Pressure Ranger includes an integrated pressure sensor and features a built-in GPS receiver that reports location of devices to the cloud, providing a map of all connected assets. The unit is powered by a 4 D Cell Lithium battery pack that is field replaceable.

The Pressure Ranger comes complete with the mobile device ready SignalFire cloud interface to monitor, trend and get alarms either by text or email message. In addition, the cloud platform provides for remote configuration and troubleshooting of the Pressure Ranger.

Features:

• Powers sensor and radio for years with an internal battery

• Class 1 Division 1 Intrinsically safe system

• Optional Class 1 Division 1 solar module with integrated charger, battery panel, and mounting bracket

• Costs less than 60ft of installed conduit

• Rugged design for demanding outdoor environments

• Up to 1/2 mile range

• Sensor independent

• 1/2” NPT conduit interface

• Automatically configures as a star or mesh network

• Simple to install and maintain

Features

• Optional Ethernet Modbus TCP interface
• Optional Gateway Output Module
• Unique design integrates high-gain, omni-directional antenna and gateway electronics in one place
• Tough materials withstand rugged outdoor environments
• RS485 Modbus RTU interface
• RS232 configuration and debug port
• Optional remote shutdown programmable control logic, no additional PLC required
• Stores the most recent readings of all nodes in the network in Modbus format
• Times out readings from off-line sensors
• Manages outbound communications
• Reduces power consumption
• Mounts with clamps, brackets, or standard electrical/plumbing fittings
• 500mW radio with high gain antenna
• Automatically configures as a star or mesh network
• Class 1 Division 2 (C1D2), Temp Code T5, Groups C&D.  Conforms to ISA 12.12.01 and UL 916, Certified to CSA C22.2 No. 142 and CSA C22.2 No. 213

The new DIN Gateway V2 is a wireless 900 mHz Gateway with integrated I/O for easy connectivity to wireless
and wired sensors, integrated Ethernet and built-in automation.

Features Include:

• Modbus interface RS485 RTU or Modbus TCP
• Long range: 3+ miles
• Wired inputs/outputs: 2DI, 2DO, 3AI
• Manages outbound communications
• Low power consumption
• External high-gain omnidirectional antenna
• Supports wireless configuration of remote nodes and HART® devices
  via PACTware® or Radar Master
• Automatically configures as star or mesh network
• Easy to program internal logic for control applications

Features

• Powers integrated pressure sensor and radio for years with an internal battery
• Class 1 Division 1 Intrinsically safe system
• Rugged design for outdoor environments
• Up to ½ mile range
• ½” NPT Process connection standard
• Rapid pressure sampling with configurable alarms and report by exception
• Extremely low power and long battery life
• Compact and simple to install and maintain
• Available in standard pressure ranges
• Pushbutton or remote zeroing

The Tilt Scout is a wireless solid state inclinometer that measures an angle from horizontal with two modes: Hatch detection and Pump Jack detection. The Hatch detection mode enables monitoring of the opening condition (closed, cracked open, opened) of a hatch for environmental and safety concerns. The Pump Jack detection mode detects and reports if it is operating or moving. The Tilt Scout can also be applied to a variety of other applications where there’s a need to detect an angle from horizontal.

Features:

• 3 Axis Accelerometer constantly monitors angle and reports status. Will report on state change.
• Hazardous Location Certified – Class 1 Division 1
• Rugged design for outdoor environments
• Magnetic mounting or with built-in installation holes
• Pushbutton zeroing
• Long battery life (greater than 5 years)
• Up to ½ mile range
• Built-in 900mHz radio and antenna
• Operates as a standard wireless node in the SignalFire network

This self-contained C1D1 Intrinsically safe solar power system consists of a solar panel with mounting bracket, integrated potted battery, and high efficiency solar charger. It provides power to both the Sentinel node and its attached sensor.

• Class 1, Division 1, Temp Code T3, Groups C&D. Conforms to UL Std. 913, Certified to Can/CSA Std C22.2 No. 157
• Provides power to both the Sentinel node and its attached sensor
• Sealed lead acid batteries for long life and extended temperature range operation
• Fully encapsulated batteries and electronics
• High capacity version available for demanding power requirements

For your Flare monitoring solutions SignalFire offer our A2 Node with input for a Type K thermocouple along with 2 discrete inputs that could be used to monitor the pilot or ignitor.  With a wireless range of up to 3 miles you can be assured of having seemless communication back to your PLC.  Add on our 9.0AH Solarpanel and you can rest easy knowing that you'll have continuous power.  

If you want to have a stand along solution and tie in your compete pad of other SignalFire nodes without a PLC, simply add a RANGER and SignalFire Cloud for a low cost monitoring solution.