Insulfoam  

Puyallup,  WA 
United States
http://www.insulfoam.com
  • Booth: 214


Thank you for virtually stopping by the Insulfoam booth!

Insulfoam is one of the nation’s largest manufacturers of block-molded expanded polystyrene (EPS). For over 50 years, Insulfoam has enabled building professionals to construct high-quality, cost-effective insulation systems. With the widest range of faced, laminated, and standard high-performance EPS insulation products, Insulfoam has the right products for any application while providing the highest R-Value per dollar of any rigid insulation.

Brands: Insulfoam EPS Insulation, R-TECH EPS Insulation Panels, R-TECH EPS Recover Board, R-TECH Fanfold, Insulfoam Flute-Fill, Insulfoam Geofoam


 Videos

Reroofing with Insulfoam EPS Flute-Fill
Hybrid Roof System with Insulfoam Foundation Means Substantial Savings for Utah Business Park
Save Labor on the Roof with Insulfoam Flute-Fill and R-TECH Fanfold

 Products

  • R-TECH® Insulation Panels
    R-Tech has been used successfully for numerous commercial, industrial and residential roofing, wall and below-grade applications. Panels are available in a wide range of sizes, thicknesses and compressive strengths up to 60 psi....

  • R-TECH® Rigid Foam Insulation

    R-Tech Panels are an engineered rigid insulation consisting of a superior closed-cell, lightweight and resilient expanded polystyrene (EPS) with advanced polymeric laminate facers. R-Tech is available with factory-adhered metallic-reflective facers, white facers or a combination of the two. The core of R-Tech is the same high-quality EPS as our InsulFoam insulations and meets or exceeds the requirements of ASTM C578, Type I, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. In addition, R-Tech has excellent dimensional stability, compressive strength and water resistance properties. R-Tech can contribute toward LEED® credits. Consult local building codes and membrane manufacturers for system requirements. Panels are available in a wide range of sizes, thicknesses up to 5" and compressive strengths up to 60 psi.

    Advantages

    • Environmentally Friendly. Does not contain any dyes, 100% recyclable foam.
    • Water Resistance. Facers provide a surface that is virtually impervious to moisture.
    • Durable. With a polymeric facer on either side of it, R-Tech is extremely flexible and durable. 
    • Enhanced R-values. With no thermal drift over its entire service life, the product is eligible for an Insulfoam 20-year Thermal Performance Warranty. 
    • Cost Effective. Typically less expensive than other comparable insulation products
  • R-TECH® Insulation Fanfold
    R-Tech FF is ideal in recover applications, and is well-suited for single-ply roof applications that employ mechanically fastened or ballasted TPO, PVC, EPDM and CSPE membranes. Available in standard sizes up to 200 sq. ft. bundles...

  • R-TECH® Rigid Foam Fanfold Insulation

    R-Tech FF (Fanfold) is a high-performance sheathing consisting of a superior closed-cell, lightweight and resilient expanded polystyrene (EPS) with advanced polymeric laminate facers. R-Tech FF meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. In addition, R-Tech FF has excellent dimensional stability, compressive strength and water resistant properties. R-Tech FF is ideal in recover applications, and is well-suited for single-ply roof applications that employ mechanically fastened or ballasted TPO, PVC, EPDM and CSPE membranes. Consult local building codes and membrane manufacturers for system requirements.

    Advantages

    • Labor Savings. R-Tech FF comes in 200 ft bundles, and is lightweight enough that the average laborer to carry an R-Tech bundle under each arm (a total of 4 squares). Competing 4′ x 8′ recover products would require 13 sheets to cover 4 squares, and weigh almost 5 times as much as R-Tech FF.
    • Environmentally Friendly. Does not contain any dyes, 100% recyclable foam.
    • Water Resistance. Facers provide a surface that is virtually impervious to moisture.
    • Durable. With a polymeric facer on either side of it, R-Tech is extremely flexible and durable. 
    • Enhanced R-values. With no thermal drift over its entire service life, the product is eligible for an Insulfoam 20-year Thermal Performance Warranty. 
    • Cost Effective. Typically less expensive than other comparable insulation products
  • Insulfoam® Tapered Roofing Insulation
    InsulFoam I, VII, II, IX, XIV and XV: Flat & Tapered EPS Roofing Insulation. InsulFoam Taper is an engineered insulation consisting of a superior closed-cell, lightweight expanded polystyrene (EPS)....

  • Tapered Roofing Insulation

    InsulFoam I, VII, II, IX, XIV and XV: Flat & Tapered EPS Roofing Insulation

    InsulFoam Taper is an engineered insulation consisting of a superior closed-cell, lightweight expanded polystyrene (EPS). InsulFoam Taper is cut from the same high-quality EPS as our flat InsulRoof products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation.

    InsulFoam Taper offers a long-term, stable R-value and has excellent dimensional stability, compressive strength and water resistance properties.

    Uses

    InsulFoam Taper is well-suited for single-ply roof applications that employ ballasted, mechanically fastened TPO, PVC, EPDM and CSPE with a slip sheet, as well as low-sloped built-up, modified bitumen and fully adhered single-ply roofs that incorporate cover boards. Consult local building codes and membrane manufacturers for system requirements.

  • Insulfoam® Flute-Fill (FL)
    InsulFoam FL is specifically manufactured for use over standing seam metal roof systems that are to be re-covered with new roof systems. InsulFoam FL can be taper-cut or square-cut to fit in the bottom of the metal roof system’s flutes....

  • InsulFoam Flute-Fill (FL)

    Flute Fill Insulation for Metal Decks

    InsulFoam FL (Flute-Fill) is a custom-made, engineered insulation consisting of a superior closed-cell, lightweight expanded polystyrene (EPS). InsulFoam FL is cut from the same high-quality EPS as our flat Insulfoam roof products and, upon request, will be manufactured to meet or exceed the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation.

    Uses

    InsulFoam FL is specifically manufactured for use over standing seam metal roof systems that are to be re-covered with new roof systems. InsulFoam FL can be taper-cut or square-cut to fit in the bottom of the metal roof system’s flutes. InsulFoam FL can also be profile-cut to match the shape of the existing metal roof. Consult local building codes and the new roof system manufacturer for system requirements.

    Advantages

    - Versatile. InsulFoam FL can be manufactured in a range of sizes, densities, thicknesses and profiles to meet any jobspecific needs.

    - Cost Effective. InsulFoam FL reduces concerns with flute spanability and minimizes the need for additional insulation. Minimizing the use of insulation above the flutes also reduces the possible need to raise curbs and other rooftop units.

    - Environmentally Friendly. It does not contain any ozonedepleting blowing agents, may contain recycled material, and is 100% recyclable if ever removed or replaced.

    - Stable R-value. The product’s thermal properties will remain stable over its entire service life. There is no thermal drift, so the product is eligible for an Insulfoam 20-year thermal performance warranty.

    - Proven Performance. EPS has been manufactured using the same chemistry since the mid-1950s, providing proven performance.

    - Water Resistance. InsulFoam FL does not readily absorb moisture from the environment. Sizes InsulFoam FL is custom-manufactured for each specific application, and is readily available in a variety of lengths, widths and shapes to meet virtually any job condition.

  • Insulfoam® Unfaced EPS Foam Insulation
    Insulfoam Unfaced EPS Foam Insulation is available in 4′ x 4′ and 4′ x 8′ standard sizes with thicknesses from ¼” to 40″, and is readily available in custom lengths, widths and densities with little to no impact on lead time. Densities up to 60 psi....

  • Insulfoam® Unfaced Foam

    For Commercial and Residential Applications

    Insulfoam Unfaced Foam is an engineered insulation consisting of a superior closed-cell, lightweight and resilient expanded polystyrene (EPS). Insulfoam Unfaced Foam is available in 4′ x 4′ and 4′ x 8′ standard sizes with thicknesses from ¼” to 40″, and is readily available in custom lengths, widths and densities with little to no impact on lead time. It is also available in tapered panels.

    With the highest R-Value per dollar over any other rigid insulation, consider Insulfoam Unfaced Foam for your projects. Available in a wide range of sizes, Insulfoam’s rigid Unfaced Foam can fit any roof, below-grade and wall insulation project needs. Unfaced boards are available between 10-60 psi for any of the following wall insulation applications:

    • Roof recover and new roof installations
    • Compatible with with both light- and dark-colored single-ply membranes
    • Metal decks 
    • Below-grade
    • Total Wall Sheathing System
    • Cavity Wall Insulation
    • Tongue & Groove Sheathing
    • Profile-Cut Siding Underlayment
    • CI Panels – Continuous insulated nail base
    • Architectural & specialty wall shapes
    • Exterior Insulation Finishing Systems (EIFS)

    Insulfoam Unfaced Foam Products:

    Insulfoam I – 10 psi

    Insulfoam VII – 15 psi

    Insulfoam II – 20 psi

    Insulfoam IX – 25 psi

    Insulfoam XIV – 40 psi

    Insulfoam XV – 60 psi


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".